Why Do It Yourself Fire Restoration and Water Restoration Is Not Recommended
Many homeowners who are confronted with water or fire damage often try to take up restoration efforts on their own. Though it might seem like a great idea at the beginning, one will often find that fire restoration and water restoration is actually quite difficult once they have begun.
Homeowners will often find themselves lacking in two different aspects. They will be found wanting in terms of technical expertise and will secondly be shorthanded when it comes to quality equipment that will be necessary to carry out fire restoration and water restoration. This is explained in more detail below.
Technical aspects of fire and water restoration that might not be common knowledge,
When it comes to fire damage, parts of the house that never came in contact with the fire can still be affected by the smoke emitted from the fire. There are different types of smoke such as fuel oil smoke, protein smoke and a few others. Each type of smoke will have to be treated with different compositions of chemicals if the odor has to be removed. A homeowner might carry out an incomplete restoration process where the odor of smoke will be temporarily eliminated. It can however come back after a few weeks and will require another restoration effort to be carried out.
Water restoration is also equally tricky in the sense that parts of the house untouched by water can still be damaged from the moisture released by the stagnated water. If there is standing water, the water will start to evaporate and turn into moisture that will start to be absorbed by porous construction materials such as ceilings, carpets etc. A water restoration company will use hygrometers to detect moisture levels. They will then use a range of equipment such as water pumps, dehumidifiers and blowers that will rid the property of potentially damaging moisture.
Fire restoration will need the use of various EPA approved chemicals. For example, ozone and other chemicals will have to be used to treat smoke odor. Ozone has to be handled properly and safely and the affected area will have to be isolated before fire restoration with ozone is carried out.
When it comes to water restoration, it is not enough if the water is merely removed and the area just dried up. The source of the water leak will have to be identified and stopped. In some cases, this source might be hard to find and only a contractor will be able to use an infrared camera to find a hidden broken pipe that cannot be seen by the naked eye.
In addition to the above points, hiring a water and fire restoration company is always a good idea as they can also do a very good job in assisting you with the insurance claims process.
Article Source: http://EzineArticles.com/expert/Gary_E_Smith/426120
Article Source: http://EzineArticles.com/5964616